22
How to assemble your appliance
•
•
Mounting the blade unit into the glass jar
•
•
Placing glass jar and top cover
How to assemble your appliance
Before assembling the unit make sure it is switched off.
For this turn the r
Mounting the blade unit into the glass jar
Turn the jar upside down and place it on a level non
For mounting the blade unit use
Placing glass jar and top cover
How to assemble your appliance
•
Attention
Always handle cutting tools with care to avoid injuries!
•
Attention!
•
Attention!
Handle the glass jar with care to avoid injuries due to breakage
of glass!
Before assembling the unit make sure it is switched off.
For this turn the rotary knob to the left to
Mounting the blade unit into the glass jar
Turn the jar upside down and place it on a level non
mounting the blade unit use
Placing glass jar and top cover
How to assemble your appliance
Attention: H
Always handle cutting tools with care to avoid injuries!
Attention!
Attention!
Handle the glass jar with care to avoid injuries due to breakage
of glass!
Before assembling the unit make sure it is switched off.
otary knob to the left to
Mounting the blade unit into the glass jar
Turn the jar upside down and place it on a level non
mounting the blade unit use …
Placing glass jar and top cover
How to assemble your appliance
: Hazard of injury
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
The jar i
Handle the glass jar with care to avoid injuries due to breakage
Before assembling the unit make sure it is switched off.
otary knob to the left to OFF-position and disconnect the powe
Mounting the blade unit into the glass jar
Turn the jar upside down and place it on a level non
azard of injury
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
The jar is made of glass and thus, it is fragile.
Handle the glass jar with care to avoid injuries due to breakage
Before assembling the unit make sure it is switched off.
position and disconnect the powe
Turn the jar upside down and place it on a level non-slip surface.
•
Insert the rubber gasket. Mind that it sits correctly.
•
Now hold of the blade unit from below, fit the 4
notches of the blade unit in
and cautiously insert the blade unit into the glass jar.
… the enclosed assembling aid tool
Put on the assembling aid tool
Hold the glass jar with one hand, turn the
aid tool
order to
… or the cover as a tool for
Inside the cover there are 2 detents, which are put into
the notches at the blade unit.
Hold the glass jar wi
via the cover
to fasten the blade unit thoroughly.
•
Take the glass jar at its handle and put it on the base
unit. This can be done in various posi
•
Place the top cover on the glass jar and press it on
firmly. The plastic lip must cover the spout.
•
Insert the small measuring cup into the cover’s
opening. Both detents of the measuring cup should
match the notches at the cover. Lock the measuring
cup by turning it clockwise to the stop.
azard of injury!
Do not touch the blade!
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
s made of glass and thus, it is fragile.
Handle the glass jar with care to avoid injuries due to breakage
position and disconnect the powe
slip surface.
Insert the rubber gasket. Mind that it sits correctly.
Now hold of the blade unit from below, fit the 4
notches of the blade unit in
and cautiously insert the blade unit into the glass jar.
the enclosed assembling aid tool
Put on the assembling aid tool
Hold the glass jar with one hand, turn the
aid tool
clockwise
order to fasten the blade unit
or the cover as a tool for
Inside the cover there are 2 detents, which are put into
the notches at the blade unit.
Hold the glass jar wi
via the cover
clockwise
to fasten the blade unit thoroughly.
Take the glass jar at its handle and put it on the base
unit. This can be done in various posi
lace the top cover on the glass jar and press it on
firmly. The plastic lip must cover the spout.
nsert the small measuring cup into the cover’s
opening. Both detents of the measuring cup should
match the notches at the cover. Lock the measuring
up by turning it clockwise to the stop.
Do not touch the blade!
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
s made of glass and thus, it is fragile.
Handle the glass jar with care to avoid injuries due to breakage
position and disconnect the power plug.
Insert the rubber gasket. Mind that it sits correctly.
Now hold of the blade unit from below, fit the 4
notches of the blade unit into the detents of the jar
and cautiously insert the blade unit into the glass jar.
the enclosed assembling aid tool
Put on the assembling aid tool.
Hold the glass jar with one hand, turn the
lockwise
to the stop
the blade unit thoroughly
or the cover as a tool for fastening
Inside the cover there are 2 detents, which are put into
the notches at the blade unit.
Hold the glass jar with one hand, turn the blade unit
clockwise
with the other hand
to fasten the blade unit thoroughly.
Take the glass jar at its handle and put it on the base
unit. This can be done in various posi
lace the top cover on the glass jar and press it on
firmly. The plastic lip must cover the spout.
nsert the small measuring cup into the cover’s
opening. Both detents of the measuring cup should
match the notches at the cover. Lock the measuring
up by turning it clockwise to the stop.
Do not touch the blade!
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
s made of glass and thus, it is fragile.
Handle the glass jar with care to avoid injuries due to breakage
Insert the rubber gasket. Mind that it sits correctly.
Now hold of the blade unit from below, fit the 4
to the detents of the jar
and cautiously insert the blade unit into the glass jar.
the enclosed assembling aid tool:
.
Hold the glass jar with one hand, turn the assembling
to the stop with the other hand
thoroughly.
fastening the blade unit
Inside the cover there are 2 detents, which are put into
th one hand, turn the blade unit
with the other hand
to fasten the blade unit thoroughly.
Take the glass jar at its handle and put it on the base
unit. This can be done in various positions.
lace the top cover on the glass jar and press it on
firmly. The plastic lip must cover the spout.
nsert the small measuring cup into the cover’s
opening. Both detents of the measuring cup should
match the notches at the cover. Lock the measuring
up by turning it clockwise to the stop.
Do not touch the blade!
Always handle cutting tools with care to avoid injuries!
Only assemble the appliance at standstill!
s made of glass and thus, it is fragile.
Handle the glass jar with care to avoid injuries due to breakage
Insert the rubber gasket. Mind that it sits correctly.
Now hold of the blade unit from below, fit the 4
to the detents of the jar
and cautiously insert the blade unit into the glass jar.
assembling
with the other hand in
the blade unit:
Inside the cover there are 2 detents, which are put into
th one hand, turn the blade unit
with the other hand in order
Take the glass jar at its handle and put it on the base
lace the top cover on the glass jar and press it on
nsert the small measuring cup into the cover’s
opening. Both detents of the measuring cup should
match the notches at the cover. Lock the measuring
Handle the glass jar with care to avoid injuries due to breakage
