Rommelsbacher DA 350, Инструкция по эксплуатации

Страница: 22 / 32

22
How the appliance works
• This appliance works quickly and effectively. The air flow drawn in from below is heated
according to the set drying temperature. The warm airflow is evenly circulated by a fan inside
the appliance. There it removes the moisture from the food.
• Occasional relocation of the drying racks, e.g. halfway through the drying time, can improve the
drying result. To do this, put the appliance in pause mode.
• The progress of the drying process can be easily checked thanks to the transparent drying
racks. Depending on the type of food to be dried, the temperature can be adjusted if necessary,
the drying process can be stopped earlier or can be extended if needed.
IMPORTANT: The appliance is equipped with a fan which distributes the air evenly inside the
appliance. After completion of the drying process, the fan continues to run for a short time
depending on the set temperature/time. This is not a defect of the appliance!
Prior to initial use
CAUTION: Please remove any protective films, tapes, advertising and packaging material
from the appliance and accessory parts!
• Before first use, heat the appliance and all drying racks for 30 minutes at maximum temperature
to remove any production odour.
• Please do not be disturbed by the short-term, slight and harmless development of smoke and
odour.
• Ensure good ventilation in the room during this time. Avoid that the resulting odour move to
other rooms.
• After the appliance has cooled down, clean the surface with a damp cloth.
• Please clean all removable accessories (drying racks, lid) in warm water with a little detergent.
Tips for success
• For a perfect and even drying result, we recommend occasional relocation of the drying racks
from top to bottom (e.g. halfway through the drying time). Activate the pause mode to do this.