Roma RR48DF-1-SS, Руководство пользователя

Страница: 27 / 32

27
MAINTENANCE
Prior to any maintenance work or changing
p arts, disconnect the appliance from the gas and
electricity power sources.
Warning: Servicing should be carried out only
by authorised personnel.
REPLACING THE TAPS
Proceed in the following way when replacing a tap:
• Remove pan supports, burner heads.
• Unscrew the burner fixing screws (Vc) (fig. 24).(four
for ultrarapid burner and two for the other burners)
• Pull out the knobs.
• Unscrew the six fixing screws (Vp) (fig.24) which
lock the side profiles and remove it.
• Remove the hob, unscrewing rear fixing screws
(Vs) (fig. 24) which lock the hob at the supports (S).
• Unscrew the nuts (D) of the gas aluminium pipes
and pull out the thermocouple quick connectors (F)
(fig.26).
• Unscrew the screws (Vt) (fig. 25) which lock the
crosspieces.l
• Unscrew the screws (Vb) (fig. 25) which unite the
the bridles of the taps to the front frame.
• Make to slip the ramp toward the back part and
unscrew the screws (Vb) (fig. 26) in order to free the
taps.
• Change seal each time a tap or a thermostat is
replaced. This will ensure perfect retention between
the tap or a thermostat and part.
.
INSTRUCTIONS FOR THE INSTALLER
24
25
26
• Reassemble all the parts following the same
procedure but in the reverse order