Roma GECCO, Инструкция по сборке

Страница: 29 / 36

29
1 Interruption of photo sensors while
opening the door OFF » no reaction if photo sensors are interrupted
ON » drive stops operation if photo sensors are interrupted
2 Function of safety connection OFF » normally closed contact for photo sensors
ON » push-button connector (normally open contact) for defined opening and closing of the door
or switching ON / OFF the illumination
3 Reaction when closing the door
(obstacle detection) OFF » Drive stops and moves towards opening for about 2 sec.
ON » Drive stops und opens the door
4 Warning light OFF » A connected warning light flashes during the movement of the door
ON » Indication of the condition of door; lights up if the door is open and is off when the door is
closed
5 Pre-warning time OFF » Deactivated
ON » Activated; warning light and LED are flashing for about 3sec., the door starts the
warning light and LED flashes
6 Reverses direction of motion OFF » Deactivated
ON » Activated; If the door reaches the lower end position it reverses directio
of motion very little upward.
7 Defined opening/ closing OFF » Deactivated
ON » Activated; One button of the radio remote control opens the door, another button closes it.
DIP switch
Power Supply 230V / 50Hz
Rated current 0,7A
Rated power 150 W
Power input stand by: ca. 2 W
Rated voltage drive 24 V; DC
Illumination 32,5V; max. 18 W
Max. pulling/compressive force 650N
Rated pulling force 195N
Protection class IP 20
Speed 180mm/s
Operating ambient temperature -20°C bis +50°C
[EN] Technical data