Rolls-Royce Helicon X3, Руководство пользователя

Страница: 41 / 140

This document is the property of Rolls-Royce and may not be redistributed or reproduced in any way, without the written permission of Rolls-Royce.
Failure to do so is a violation of copyright laws.
P&T Control_20-12-00136_UT535E_Brasil _V2
Page 7 of 14
Control panel functions
Any operation of the system can be performed through the graphical interface. The most vital operations
can in addition be performed by using dedicated pushbuttons in the control lever base (see next section).
Summary of features on the screen:
- LAN contact
-
Dimmer
- Speaker (not used)
- 24V power input
Display pages
The Main View Page includes the following:
-
A shortcut area where the detail-level pages can be reached.
-
An area for COMMON IN COMMAND for all the thrusters.
-
A vessel overview area with graphical and numeric information of all thrusters:
-
Indication thruster pitch command and actual pitch feedback
-
Indication thruster steering command and actual steering feedback.
-
Indication thruster speed command and actual propeller speed.
When selecting one of the detail pages these will replace the overview area. The short-cut area will
remain available from all pages.
Thruster page information is project dependent. Below are typical examples of each propeller/ thruster
type:
Main Thruster (diesel-electric system) pages includes the following functions:
-
Indication thruster steering command and actual steering feedback.
-
Indication thruster speed command and actual propeller speed.
-
Selection and indication of IN COMMAND.
-
Indication of STEERING LOCAL CONTROL.
-
Indication of SPEED LOCAL CONTROL.
-
Indication of ZERO LEVER.
-
Selection and indication of START/ STOP OF SYSTEM.
-
Selection and indication of START/ STOP OF THRUSTER.
-
Selection and indication of COMMON PORT CONTROL.
(Common control of both thrusters from port lever).
-
Selection and indication of AUTOPILOT ON/OFF.
-
Indication of DP/JOYSTICK CONTROL.
-
Indication of POWER REDUCED.
-
Dimming of lever.
Tunnel Thruster page includes the following functions:
-
Indication thruster pitch command and actual pitch feedback.
-
Selection and indication of IN COMMAND.
-
Indication of SPEED LOCAL CONTROL.
-
Selection and indication of START/ STOP OF SYSTEM.
-
Selection and indication of START/ STOP OF THRUSTER.
-
Indication of DP/JOYSTICK CONTROL.
-
Indication of POWER REDUCED.
-
Dimming of lever.