15
Initialize the Rollei eGimbal G4 Plus
Technical Specifications
Initialization Instructions
1 . Install the camera properly .
2 . Put the Gimbal on a stationary flat surface and keep motionless .
3 . Start the Gimbal .
4 . The Gimbal is activated and it will be initialized automatically . Afterwards pick
up the Gimbal and start working with it .
Rollei eGimbal G4 Plus needs to be initialized whenever the following
situations appear after power on
1 . After power on, the angle of pitch is not level with the horizon line .
2 . After power on, the angle of roll is not parallel with the horizon line .
3 . When the Gimbal is in heading lock, the angle of heading moves frequently
(heading is not stationary) .
7
8
Motionless Flat Surface
Operating Voltage
Min . 6 .0 V
Max . 17 .0 V
Standard 8 .6 V
Pitch Angle
Min . –160°
Max . +160°
Standard 0°
Roll Angle
Min . –50°
Max . +50°
Standard 0°
Vertical Heading Angle
Min . –160°
Max . +160°
Horizontal Heading Angle
Min . –50°
Max . +50°
Vertical Change of Position
Min . 2°/Sec .
Max . 75°/Sec .
Horizontal Change of Position Min . 3°/Sec .
Max . 150°/Sec .
Static Mode
Min . 0 .01
Max . 0 .05
Standard 0 .02
Motion Mode
Min . 0 .1
Max . 0 .5
Standard 0 .2
Overload Protection
800 mA
Size
33 .9 x 7 .5 x 6 .5 cm
Weight
265 g (net)
