14
Function Interface Instructions
Firmware Upgrade Instruction
Please visit the official website of Rollei (www .rollei .com) to download the USB
driver, firmware upgrade software and the latest firmware . Then unzip the RAR
file and remove the batteries . Connect the Gimbal with the computer as shown
above . Please refer to the manual of update operation for upgrading otherwise
malfunction can occur .
Attention: Please make sure that the connection to the computer
is done by the USB connector.
Parameters Configuration
The heading-following-speed can be configurated through the parameter setting
software . Users can adjust the following speed according to their requirments of
filming . There are three modes: ”SLOW“, ”NORMAL and ”FAST“ . Default setting is
”NORMAL“ mode .
Attention: Please make sure that the connection to the computer
is done by the USB connector
Gimbal Calibration
The Gimbal settings can be calibrated through the parameter setting software .
Users can adjust the pitch and roll angle in a small angle to achieve more accuracy
while filming . Please insert the batteries and then refer to the connection dia-
gramm to connect the Gimbal with the computor for calibration .
Attention: Please make sure that the connection to the computer
is done by the USB connector
Please remove the batteries before upgrading
Attention: Make sure to use the USB connector
for connecting with the computer
PC
Function Interface
USB Cable
USB Connector
6
Upgrade…
