Rollei DR5100 Скачать руководство пользователя страница 180

Страница: 180 / 190

180

There is a vertical
smear on the image.

This is a phenomenon that occurs when a bright
subject is shot. It is called the smear phenome-
non.

This is normal.

The cross for the AF
target cannot be
moved.

The camera is not in Macro mode.

Preset Macro mode and press the ADJ. button
three times (or four times).

P.48

Playback/Deleting

Symptom

Cause

Measure

Page

Cannot Playback. Or
the Playback screen
does not come out.

It is not set to

(Playback).

Turn the Mode Dial to

(Playback Mode).

P.86

The AV cable was not connected properly.

Reconnect it properly.

P.94

The video format is set wrong.

Set to correct format.

The contents of SD
Memory Card can-
not be replayed, or
the replay screen
does not appear.

A Memory Card is not loaded. Or a Memory
Card with no stored images is loaded.

Load a card with stored images.

P.18

You played back a Memory Card that was not
formatted by this device.

Load a card that was formatted and stored on by
this device.

P.112

You played back a Memory Card that was not
recorded normally.

Load a normally recorded card.

P.18

The Memory Card's contact surfaces are dirty.

Wipe with a soft, dry cloth.

There is something wrong with the Memory
Card.

Play another card and if there is nothing wrong
with it, the camera is OK. There may be some-
thing wrong with the card, so do not use it.

An image disap-
peared.

Batteries are running low.

If using alkaline batteries, replace with a new
set.
If using rechargeable batteries, recharge or use
the AC Adapter.

P.12
P.14
P.15

The camera was left unattended and not used,
so Auto Power-Off shut it off.

Turn the power back on.

P.17

Files cannot be
deleted.

The file has been set to protect.

Release the protection.

P.104

The SD Memory Card is "locked".

Release the "Lock (write-protection)".

P.18

Cannot format a
Memory Card.

The SD Memory Card is "locked".

Release the "Lock (write-protection)".

P.18

Shooting

Symptom

Cause

Measure

Page

Содержание DR5100































































































































































































Результаты поиска

Содержание DR5100

Отзывы:

Похожие инструкции для DR5100

Бренды по названию

Популярные бренды

Rollei DR5100, Руководство по эксплуатации

Результаты поиска

Содержание DR5100

Отзывы:

Похожие инструкции для DR5100

Бренды по названию

Популярные бренды