78
ENGLISH
2.4G wireless transmitter
2.4G Master Nikon TTL
If the master unit is in 2 .4G wireless TTL or M mode, the slave unit supports three
different modes: wireless off, TTL, M .
1 . Press the mode button repeatedly to set the master
unit to iTTL or manual mode (M) .
2 . Slave unit group settings
Group A:
Press the wireless setup button
repeatedly until group A is highlighted . Press the left
and right button to change the group A mode . Press the middle button to exit or
continue to press the wireless setup button to set the mode B .
Group B:
Press the wireless setup button repeatedly to change the group B
modes . Press the middle button to exit or continue to press the wireless setup
button to set the mode C .
Group C:
Press the wireless setup button repeatedly to change the group C
mode . Press the middle button to exit .
3 . Power settings for each slave unit .
Press the middle button repeatedly until group A is highlighted . Assuming that
group A turns on the wireless mode‘s power setting and press the middle button
to enter the next group setting .
