73
2.4G wireless transmitter
ETTL 2.4G MASTER (Canon: E TTL)
Press the mode button to set the master light to auto E-TTL mode, and make
automatic flash shooting .
1 . Press the mode button repeatedly until E-TTL
mode is shown on the display .
2 . Press the zoom button repeatedly until
<RATIO OFF> is highlighted .
3 . Select the flash ratio: Press the left and right button
to set the flash ratio which can be <RATIO>,
<RATIO A:B> or <RATIO A:B:C> . If <RATIO> is
selected, all slave units will have the same output
as the master flash (exposure compensation and
bracketing) . <RATIO A:B> means that the groups
A and B will flash and that the output bright ratio will be for the groups A and
B . <RATIO A:B:C> means that the three groups will flash and the output bright
ratio will be set for group A and B; and group C is the power compensation .
4 . Set the flash ration <RATIO A:B> or <RATIO A:B:C> . Press the button A to
<RATIO A:B> and the flash light ratio will be highlighted . Press the left and right
button to set up the flash light ratio and all kinds of codes as shown below .
8:1
5 .6:1
4:1
2 .8:1
2:1
1 .4:1
1:1
1:1 .4
1:2
1:2 .8
1:4
1:5 .6
1:8
