68
ENGLISH
Flash light transmitter mode
Multi flash mode (MULTI)
Set the camera to M mode . When you use the strobe mode, it can emit a series of
quick flashes, which allows you to perform multiple flash strokes on a single photo,
freezing a series of actions in sequence . In this mode, the flash light output power,
the number of flashes as well as the flash frequency (the number of flashes per
second in HZ) can be set to your needs . This mode is more common when shooting
moving objects . To prevent the flash light from overheating and damage, do not
perform strobe flash continuous shooting for more than 10 continue times . Between
two multiple exposure operations, let the light have enough time to call back . Flash
10 times, please let the light cool down for at least 15 minutes . if you are trying to
perform a strobe flash burst for more than 10 consecutive strokes, to prevent
flashing the lamp may overheat and the flash may stop automatically . If this
happens, let the flash light cool down at least 15 minutes .
Select the flash mode
Press the mode button repeatedly until MULTI is
shown on the display .
Frequency setting
Press the middle button of the keypad so often until
the HZ is flashing and press the left or right button
to change the frequency value . The available flash
frequency can be set from 1HZ to 199 HZ .
Number of flash settings
Press the middle button of the keypad so often
until the number is flashing and press the left or
right button to change the value . The available flash
number can be set from 1-40 .
