74
ENGLISH
2.4G wireless transmitter
5 . Press the middle button to C and the group C exposure compensation will be
highlighted . Press the left and right button to set the flash light ratio . Press the
middle button for confirmation .
• If <RATIO A: B> is set, the slave unit in the slave unit group <C> does not fire .
• If the slave unit in the slave unit group <C> is directed toward the subject, the
subject will be overexposed
Manual wireless master mode (wireless 2.4G MASTER) (Canon) M
Press the mode button repeatedly to set the master flash to the manual mode .
Now the master flash can be used so send all relevant data to the slave units .
1 . Press the mode button repeatedly to select the m
mode .
2 . Press the zoom button repeatedly until <RATIO
OFF> is highlighted .
3 . Select the flash ratio: Press the left and right button to set the flash ratio which
can be <RATIO>, <RATIO A:B> or <RATIO A:B:C> . If <RATIO> is selected, all
slave units will have the same output as the master flash . <RATIO A:B> means
that the groups A and B will flash and that the power output can be set for the
group A and B . <RATIO A:B:C> means that the three groups are on and that the
power output can be adjusted independently .
4 . Set the flash output <RATIO A:B> or <RATIO A:B:C>
Press the middle button repeatedly until group A is highlighted on the display .
Press the right or left button to adjust group A power .
Press the middle button repeatedly until group B is highlighted on the display .
Press the right or left button to adjust group B power .
Press the middle button repeatedly until group C is highlighted on the display .
Press the right or left button to adjust group C power .
