71
2.4G wireless transmitter
The wireless flash system is composed by multiple wireless flashes . You can create a
wide variety of lighting effects .
1 . In the wireless flash mode, the focus indicator flashes to indicate that the flash is
in slave mode . This function can be turned off in the custom function . Please note
to activate the function again if needed .
2 . The flash which is in slave mode will not go into the sleep mode to ensure that
all information from the master flash can be well received .
Set wireless channel
Press the zoom button repeatedly until the channel no is flashing .
Press the left and right key to set the wireless channel between 1-16 .
To set the main unit flash on / off:
You can disable the MASTER unit so that only the slave unit‘s flash fires .
To set the Master Flash press the zoom button to < > blinking .
Press the left and right key to set the main flash output . When master flash function
is disabled the icon< > is displayed . When the Master Flash is turned on, the icon
< > is displayed .
• In MASTER mode, the slave unit has the same mode as the MASTER unit .
• In MASTER mode, the power of group A is the same as the power of
MASTER unit .
• MASTER mode supports high-speed synchronization but not the
rear-curtain sync .
