background image

Maintenance

WallPod Intelligent EV Charging Unit

EVWM-V01-R1 Installation and Operation Manual

Page 

35

of 

35

December 2022

Suggested Inspection and Testing

A record or inspection, testing and maintenance must be kept and may be required to 

support warranty claims.

1

st

and 3

rd

Quarter

External Visual Inspection:

x

Check for physical damage.

x

All warning labels present and 

legible.

x

Status Indicators operating and 

displaying correct status.

x

If installed, check the condition of the 

charging socket, contacts and 

socket flap.

x

If installed, make sure the 

access/cable lock is operational.

Internal Visual Inspection:

x

Check for physical damage.

x

Visual inspection for any heat 

degradation.

x

No foreign bodies or other 

contamination present.

Clean the enclosure.

2

nd

and 4

th

Quarter

External Visual Inspection:

x

Check for physical damage.

x

All warning labels present and legible.

x

Status Indicators operating and 

displaying correct status.

x

If installed, check the condition of the 

charging socket, contacts and socket 

flap.

x

If installed, make sure the access/cable 

lock is operational.

Internal Visual Inspection:

x

Check for physical damage.

x

Visual inspection for any heat 

degradation.

x

No foreign bodies or other 

contamination present.

Electrical:

x

Make sure wires/terminals are secure.

x

Check Voltage and Polarity.

x

Check operation of switchgear.

x

Test earth fault loop impedance.

x

Test power outlets using a load 

simulator.

x

If chargepoint illumination is installed, 

check the illumination and light sensor 

operate correctly.

Clean the enclosure.

Advice provided above does not override any regulations that may apply in the region 

of use. Quarterly Inspection and testing (maintenance) is recommended where 

chargepoint use is frequent and/or intensive. Operators may consider increasing or 

reducing elements of the maintenance frequency to a level that matches the pattern 

of chargepoint use but should, as a minimum, meet the requirements of the current 

regulations.

Содержание WALLPOD ROLEC4020B









































Отзывы: