ROLEC WALLPOD ROLEC4020B, Руководство по установке и эксплуатации

Страница: 31 / 40

Operation
EVWM-V01-R1 Installation and Operation Manual WallPod Intelligent EV Charging Unit
December 2022 Page 30 of 35
Operation
As a ‘Smart’ product, this chargepoint can be operated and/or monitored by a wide
range of web enabled devices. Alternatively, it may be operated manually via an RFID
card/fob.
VendElectric EV Driver Application
The VendElectric EV Driver Application is a free download for use with smartphones
running Google Android or Apple IOS. The application may be downloaded from Google
Play or the Apple App Store.
Alternatively, the application can be used via a web browser.
x
https://app.vendelectric.com
Users of different applications should refer to the specific application developer’s
documentation.
1. Refer to the status indicator guide to determine whether the chargepoint is
available for use.
Status Indicator Guide
Flashing blue light Ready for charge – cable not connected to vehicle.
Flashing green light Ready for Standard Charging.
Fixed blue light Cable plugged in but not charging.
Fixed green light Charge in progress.
Fixed red light Potential earth leak fault detected by the 6mA DC device.
Flashing red light Potential Communications Fault.
Flashing alternate
red and green
PEN fault detected by the TruePEN device and charging
has been stopped.
NOTE : Indication is cancelled when the TruePEN device is
reset, and normal operation is restored.
Fixed or flashing
amber/yellow
Software update is in progress. Do not interact with the
chargepoint until the LED returns to Flashing blue.
No light
No power to the unit or the breaker within the unit has
tripped and needs to be reset.
2. Make sure the status indicator shows that the unit is ready to charge.
3. Connect the charging cable to the chargepoint (socket chargepoints only).
4. Connect the other end of the cable to the vehicle.
5. Use the mobile application to start the charge session.
6. Alternatively use an RFID card/fob to start the charge session.
x
The chargepoint will issue a ‘beep’ sound to indicate the card has been
recognised and accepted.