Maintenance
Quantum:EV OpenCharge
EVQROCM-01-V03-R0 Installation and Operation Manual
Page
21
of
25
January 2022
Maintenance
NOTE:
In the event of a hardware issue, always contact your installer first.
x
If damage has been sustained to communications devices and/or other ‘Smart’
components, it is recommended that an approved Rolec installer is called to
perform the repair.
x
Damage caused to the equipment by misuse, lack of maintenance, inappropriate
maintenance or modification is not covered by the manufacturer warranty.
EV equipment operators should have a Site Maintenance Plan that considers the type,
frequency and intensity of use of the equipment on site, and which schedules
maintenance as appropriate to keep the equipment in good working order.
EV charging equipment should be included in the electrical element of the site
maintenance plan and must be performed by an appropriately qualified electrical
engineer in accordance with applicable regulations for the region of use.
A typical maintenance (inspection and testing) schedule is provided on the next page.
This schedule alternates on a quarterly basis between a shorter and longer series of steps
but the frequency of which this work is performed must be determined in line with the
operator’s Site Maintenance Plan.
x
Failure to properly maintain the charger will invalidate the warranty.
External Cleaning and Inspection
Depending on the working environment, external cleaning and inspection may be
required more regularly than other maintenance tasks:
1. Clean the external surfaces of the equipment with a damp cloth.
CAUTION: Equipment Damage
To avoid damage to the surface finish, and/or internal components do NOT use:
x
Abrasive materials.
x
Mineral or petroleum solvents / degreasers.
x
Hose pipes, Jet washers or Steam cleaners.
2. Regularly inspect the exterior of the equipment for visual damage.
x
If damage affects safety, isolate the equipment and prevent its use until
appropriate repairs have been completed.
3. If required, remove any debris from around the charging socket.
Содержание OCPP0410
Страница 27: ......