3
Menu List
Pressing the [MENU] button displays the menu.
MEMO
5
The default value is printed in bold characters.
5
You can return the menu item you’re setting to its factory-default value by holding down the [VALUE] dial and pressing the [EXIT] button.
5
You can change the setting value in larger steps by holding down the [VALUE] dial as you turn it.
VIDEO INPUT
* The ranges of settings vary according to input/output format. Also, some changes to setting values do not alter the video picture.
Menu item
Value
Description
2nd level
3rd level
INPUT-1
:
INPUT-8
INPUT SELECT
HDMI, RGB/COMPONENT, COMPOSITE, YC, STILL1,
STILL2, STILL3, STILL4, SHARE (*1)
This sets the type of video signal to input.
HDCP INPUT ENABLE
(*2)
DISABLE, ENABLE
This sets whether input of copyright-protected (HDCP) video is permitted
(p. 20).
AUTO SAMPLING
(*3) (*4)
(ENTER)
This executes automatic adjustment during RGB signal input.
COLOR SPACE
(*5)
AUTO, RGB (0-255), RGB (16-235), YCC (SD), YCC (HD) This sets the color space for input video.
FLICKER FILTER
(*5)
OFF, ON
Setting this to “ON” reduces flicker in input video.
ZOOM
(*6)
10.0 %–100.0 %–1000.0 %
This adjusts the zoom ratio of input video.
TYPE
FULL, LETTERBOX, CROP, DOT BY DOT, MANUAL
This adjusts the aspect ratio of input video.
MANUAL SIZE H
-2000–0–2000 (pixel)
This adjusts the horizontal size of input video.
MANUAL SIZE V
-2000–0–2000 (pixel)
This adjusts the vertical size of input video.
POSITION H
-1920–0–1920 (pixel)
This adjusts the horizontal position of input video.
POSITION V
-1200–0–1200 (pixel)
This adjusts the vertical position of input video.
FLIP VERTICAL
(*7)
OFF, ON
Setting this to “ON” flips input video vertically.
BRIGHTNESS
-64–0–63
This adjusts the brightness of input video.
CONTRAST
-64–0–63
This adjusts the contrast of input video.
SATURATION
-64–0–63
This adjusts the color saturation of input video.
RED
-64–0–63
This adjusts the red level of input video.
GREEN
-64–0–63
This adjusts the green level of input video.
BLUE
-64–0–63
This adjusts the blue level of input video.
FREQUENCY
(*3)
-128–0–127
This adjusts the frequency.
PHASE
(*3)
-128–0–127
This adjusts the phase.
(*1): “SHARE” can be set using INPUT-2 through 8. This enables sharing of the video source on the channel previous to the set channel. For details, refer to the Owner’s Manual,
“Sharing a Video Source (SHARE)” (p. 19).
(*2): This can be set only when “INPUT SELECT” is set to “HDMI.”
(*3): This can be set only when “INPUT SELECT” is set to “HDMI” or “RGB/COMPONENT.” It has no effect during component signal input.
(*4): This can be executed only when the corresponding video input channel has been selected with cross point. It has no effect during component signal input.
(*5): This can be set only when “INPUT SELECT” is set to “RGB/COMPONENT.”
(*6): When the settings described below are in effect, reducing to smaller than the input size is not possible.
5
When the “MODE” setting is a value from “ROTATION-L1” to “ROTATION-L4” or from “ROTATION-R1” to “ROTATION-R4”
5
When “INPUT SELECT” is set to a value from “STILL1” to “STILL4”
(*7): Vertical flipping is not possible when “INPUT SELECT” is set to a value from “STILL1” to “STILL4.”
