Menu List
14
Value
Command value
Description
Sony [NEW]: Power ON
power “on”[CR][LF]
This is the new-format Power ON command for Sony projectors.
Sony [NEW]: Power OFF
power “off”[CR][LF]
This is the new-format Power OFF command for Sony projectors.
Sony [NEW]: V-Mute ON
blank “on”[CR][LF]
This is the new-format Video Mute ON command for Sony projectors.
Sony [NEW]: V-Mute OFF blank “off”[CR][LF]
This is the new-format Video Mute OFF command for Sony projectors.
Sony [NEW]: A-Mute ON
muting “on”[CR][LF]
This is the new-format Audio Mute ON command for Sony projectors.
Sony [NEW]: A-Mute OFF muting “off”[CR][LF]
This is the new-format Audio Mute OFF command for Sony projector.
SYSTEM
* The settings for the following menu items are not saved at individual presets. Only a single set is saved in the unit. After settings for menu items have
been made, the new values are saved in the unit’s internal memory when you exit the menu.
Menu item
Value
Description
2nd level
3rd level
FRAME RATE
—
59.94 Hz, 50 Hz
This sets the system clock.
FIELD SYNC
—
OFF, ON
This sets field sync on or off.
KEY LOCK MODE
—
(ENTER)
Pressing the [VALUE] dial displays the “KEY LOCK MODE” popup. This sets whether key locking is
activated (ON) or deactivated (OFF) for each of the following buttons.
Setting items
Value
Description
CROSSPOINT
OFF, ON
Cross-point selection buttons
SWITCH MODE
OFF, ON
[SWITCHING MODE] button
MENU+EXIT
OFF, ON
[MENU] button, [EXIT] Button
VALUE
OFF, ON
Cursor buttons, [VALUE] button
CROSS-NOINPUT
OFF, ON
Cross-point selection buttons that have no signal input
CROSS-OFF
OFF, ON
[OFF] buttons
CROSS-OUTPUT1
:
CROSS-OUTPUT4
* This varies according
to model.
OFF, ON
Cross-point selection buttons for each respective
OUTPUT row
Operation: Turns key lock mode on/off
1.
For “KEY LOCK MODE,” set the parameter to “ON” for buttons whose operations you want to
have no effect.
2.
Hold down the [EXIT] button and press and hold the [MENU] button (for 3 seconds or longer).
The message “KEY LOCKED!!” is displayed and the key lock mode is turned on. The buttons you
specified in step 1 are locked.
Again holding down the [EXIT] button and pressing and holding the [MENU] button (for 3
seconds or longer) makes the message “KEY RELEASED!!” appear and turns off the key lock mode.
MEMORY PROTECT
—
OFF, ON
Setting this to “ON” prohibits saving to presets.
RECALL LOCK
—
OFF, ON
Setting this to “ON” prohibits recalling presets.
BEEP
—
OFF, ON
This sets the audible beep on or off.
LCD BACKLIGHT
—
0–7
This adjusts the brightness of the display.
* When this is set to “0,” the display’s backlight is completely dark.
DIMMER
—
0–7
This adjusts the brightness of the LEDs.
* When this is set to “0,” the LEDs are completely dark.
TOP DISPLAY
—
IN/OUT STATUS, INPUT STATUS1,
INPUT STATUS2, OUTPUT STATUS,
AUDIO VOLUME
This sets the top screen displayed at startup.
START UP
—
LAST MEMORY, PRESET1–32
This sets the settings loaded at startup.
LAST MEMORY:
The last-saved settings are loaded. When “LAST MEMORY” has been selected, settings are saved in
internal memory at the following times.
5
On displaying a menu
5
On exiting a menu
5
When 10 seconds has elapsed since the last operation was performed
MONITOR STATUS
—
(ENTER)
Pressing the [VALUE] dial displays the “MONITOR STATUS” popup.
This displays the status of equipment connected to the HDBaseT OUTPUT or HDMI OUTPUT
connectors.
