18
KIT EDIT
MASTER EQ
Here you can adjust the overall tonal character of the entire drum kit. You can use four bands (LOW/MID1/MID2/HIGH) of boost/cut to adjust the
sound. This can also be used to compensate the tonal character when using the master compressor.
You can adjust the equalizer’s effect (shelving and peaking) for the low frequency (LOW) and high frequency (HIGH).
The master EQ is output from the MASTER OUT jacks and PHONES jack.
This indicates whether the master EQ effect is output (
) from each
jack or is not output (
).
MST:
MASTER OUT jacks
PHO:
PHONES jack (always output)
Parameter
Value
Explanation
Type
SHELV (Shelving),
PEAK (MID1 and MID2: fixed to “PEAK”)
Type of equalizer
Q
0.5–8.0 (only when Type is set to “PEAK”)
Width of the frequency range
A higher Q narrows the affected area.
Freq
20Hz–1kHz (LOW)
20Hz–16kHz (MID1, 2)
1kHz–16kHz (HIGH)
Center frequency
Gain
-12–+12dB
Amount of boost/cut
[F1] button (OFF, MST EQ ON)
OFF, MST EQ ON
Turns master EQ on/off.
* If the routing setting (p. 36) Master Out is set to “DIRECT,” the effect of the master EQ does not apply to the sound that is output from the MASTER OUT jacks.
Содержание V-Drums TD-27
Страница 1: ...Data List 2020 Roland Corporation...