Roland V-Drums TD-27 страница 16 Скачать руководство пользователя | Manualshive

Страница: 16 / 58

background image

16

KIT EDIT

PAD COMP

This is a compressor that each drum kit provides for each pad.
The pad compressor effect can be applied only to the output from the DIRECT OUT jacks. You can also disable the pad compressor effect from
being applied to the PHONES jack output (p. 36).

This indicates whether the pad compressor effect is output (

) from each

jack or is not output (

).

MST:

MASTER OUT jacks

PHO:

PHONES jack

DIR:

DIRECT OUT jacks

Parameter

Value

Explanation

Type

KICK 1, 2, SNARE1, 2, TOM 1, 2, CYM 1,

2, SOFT, HARD, LIMITER

Character of the compressor
* When you change this parameter, the pad compressor’s parameters Ratio, Knee, Attack, and

Release change to optimal settings for your selection. You can then make further adjustments to

these parameters as necessary.

Threshold

-48–0dB

Volume level at which compression begins

Gain

-24–+24dB

Output level of the compressor

Ratio

1:1–100:1

Compression ratio

Knee

HARD, SOFT1–3

Attack of the sound at the moment compression is applied

Attack

0.1–100mSec

Time from when the volume goes up the threshold level until the compressor effect applies

Release

10–1000mSec

Time from when the volume falls below the threshold level until the compressor effect no longer

applies

[F1] button (OFF, COMP ON)

OFF, COMP ON

Turns pad compressor on/off.

*  Pad compressor settings are made for individual pads. They cannot be made for individual strike locations (such as the head or rim).
*  If the routing setting (p. 36) PadEq/Comp to direct is “OFF,” the pad compressor effect does not apply to the sound that is output from the DIRECT OUT jacks.
*  If the routing setting (p. 36) PadEq/Comp to direct is “OFF,” and Master Out is set to “DIRECT,” the pad compressor effect does not apply to the sound that is output from the

DIRECT OUT jacks and the MASTER OUT jacks.

* If the routing setting (p. 36) PadComp to Phones is “OFF,” the pad compressor effect does not apply to the sound that is output from the PHONES jack.

Meters shown in the PAD COMP screen

In the PAD COMP screen, the “input meter,” the “gain reduction meter,” and the “output meter” are displayed.
Adjust the pad compressor’s “Gain” so that the output meter does not exceed 0 dB (i.e., so that it does not clip).

Output meter

The “output meter” shows the output level

following the pad compressor.

Input meter

The “input meter”

shows the level (dB)

being input to the pad

compressor.

Gain reduction meter

The “gain reduction meter”

shows the change in level

(dB) produced by the pad

compressor.

«
...
14
15
16
17
18
...
»

Содержание V-Drums TD-27



























































Отзывы:

Нет отзывов

Похожие инструкции для V-Drums TD-27

Бренд: ION Страницы: 63

Бренд: Carpe Iter Страницы: 20

Бренд: E-Mu Страницы: 5

Бренд: ROYOLE Страницы: 24

Бренд: Yamaha Страницы: 91

Бренд: Yamaha Страницы: 2

Бренд: Techtonic Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды