10
When adjusting, use the drum key supplied with the VH-11.
• On the PD-85, adjusting the head tension affects only the
head response, and does not change the pitch of the sound,
as it would on an acoustic drum.
• The head tension will change as the instrument is used, so
you should readjust when necessary.
1.
Use the drum key supplied with the VH-11 to
tighten the tuning bolts.
Tighten the bolts to keep the space even all around between
the frame and the hoop.
* The setup includes a lock bushing (to prevent loosening), so
the bolt should be tightened fairly securely.
fig.PD-85-Head1.e
Tighten each tuning bolt one by one, observing the
numerical order shown in the diagram.
Do not firmly tighten a single tuning bolt by itself. Doing
so will make it impossible to tension the head evenly,
and will cause malfunctions such as failure to accurately
detect the striking location.
fig.PD-85-Head2
2.
Tension the head evenly while checking the feel of
striking the pad.
Normally, it would be appropriate if the tension is the same
as an acoustic drum.
PD-85
(V-Pad)
Adjusting the Head Tension
Hoop (Rim)
Tuning Bolt
Washer
Sensor
Stand Fixing Screw
Head
Holder
Frame
Output Jack
Be sure to adjust the head tension before use.
In general, a tension that produces a strike response
approximately the same as an acoustic drum will be
appropriate.
• Striking the head when the head tension is loose
may damage the sensor and head.
• Should you neglect to make the appropriate
settings, you could likely experience the following
problems:
Sometimes it does not sound (uneven volume).
The volume is too low (reduced sensitivity).
Keep the space
even all around.
Hoop
Frame
1
2
3
4
5
TD-12KX_e.fm 10 ページ 2009年11月10日 火曜日 午後12時6分
Содержание V-Drums TD-12KX
Страница 1: ...Owner s Manual TD 12KX_e fm 1...