Roland TM-6 PRO, Список данных

Страница: 22 / 37

22
TRIGGER SETUP
PARAM
Parameter Value Explanation
THRESHOLD/SENS tab
Input Type This is the same parameter as Input Type (p. 21) in the BANK.
Trig Type*1 This is the same parameter as Trig Type (p. 21) in the BANK.
Threshold 0–31
Minimum sensitivity of the drum trigger
This setting allows a trigger signal to be received only when the
drum trigger is above a determined force level (velocity). This
can be used to prevent a drum trigger from sounding because of
vibrations from other drum triggers. In the following example, B
will sound but A and C will not sound.
Check this and adjust accordingly. Repeat this process until you get
the perfect setting for your playing style.
Sensitivity 1–32
You can adjust the sensitivity of the drum triggers to accommodate your personal playing style.
Increasing this value increases the sensitivity, so that even soft strikes on the drum trigger are sounded at
high volume. Decreasing this value decreases the sensitivity, so that even strong strikes on the drum trigger
are sounded at low volume.
Curve
Volume change in response to drum trigger strike strength
LINEAR
LINEAR
Volume
Playing
dynamics
The standard setting. This produces the most natural
correspondence between playing dynamics and
volume change.
EXP1, EXP2
EXP2 EXP1 EXP2 EXP1
Volume Volume
Playing
dynamics
Playing
dynamics
Compared to “LINEAR,” strong dynamics produce a
greater change.
LOG1, LOG2
LOG2 LOG1 LOG2 LOG1
Volume Volume
Playing
dynamics
Playing
dynamics
Compared to “LINEAR,” a soft playing produces a
greater change.
SPLINE
SPLINE
Volume
Playing
dynamics
Extreme changes are made in response to playing
dynamics.
LOUD1, LOUD2
LOUD2 LOUD1 LOUD2 LOUD1
Volume Volume
Playing
dynamics
Playing
dynamics
Very little dynamic response, making it easy to
maintain strong volume levels. If you’re using a drum
trigger as an external drum trigger, these settings will
produce reliable triggering.
Threshold