Roland SolJet SJ-500, Руководство пользователя

Страница: 62 / 77

60
Description of Keys
Default
value
Setting
range
Function Submenu
Top
menu
Key
— — — — This switches on and off the sub power . When the
power is switched on, the POWER LED lights up.
— — — — This detects the presence of material, and its dimensions,
and shows the printable size on the display.
The SETUP LED flashes while detection of material
width is in progress. When setup finishes, the SETUP
LED lights up continuously.
Also press this key when removing the material.
— — — — The [PAUSE] key pauses operation. The PAUSE LED
lights up while paused.
Pressing this key again cancels the paused state.
Holding down the [SETUP] key for about 1 second
while paused causes remaining data to be cleared and
cancels the material's setup state.
— — — — This sets the print-start location in the horizontal
direction (the direction of carriage movement). For more
information, see "User's Reference -- Printing at the
Desired Location -- Specifying a location in the left-right
direction (the direction of carriage movement)."
PRINT
MODE
— [PRINT
MODE]
PHOTO
SUPER
FINE
FINE2
NORMAL
FAST
DRAFT
[PRINT
DIRECTION]
UNI-DIRECTION
BI-DIRECTION
[PRINT
MODE]
FINE2
[PRINT
DIRECTION]
BI-DIREC-
TION
This displays the [PRINT MODE] menu for setting
image quality.
This is used to specify the printing quality and unidirec-
tional or bidirectional printing.
Settings cannot be made while printing is in progress.
To exit the [PRINT MODE] menu screen, press the
[MENU] key or the [CLEANING] key or the [SETUP]
key.
For more information, see "Setup for Printing -- Setting
the Printing quality and Printing direction."
Description of Keys
— — — — This displays the [HEAD CLEANING] menu for
cleaning of the printing head. Before starting to print,
you can carry out a printing test to check the printing
quality.
You can perform cleaning while in any state. Note that
[TEST PRINT] is not displayed while the printing is in
progress.
[TEST PRINT]: Performs a printing test within an area
of approximately 108 mm (4-5/16 in.) by 18 mm (6/8
in.). If there is a problem, then continue by carrying out
cleaning from the [START] menu.
[START]: Begins cleaning of the printing heads. After
cleaning, carry out a printing test to make sure there are
no problems.
For more information, see "Setup for Printing -- 2 Test
Printing" and "Maintenance -- Cleaning the Printing
Heads."