Roland SolJet SJ-500, Руководство пользователя

Страница: 39 / 77

37
Press the [MENU] key and [ ] key to make the
following screen appear on the display.
1
MENU
AUTO SHEET CUT
Press the [ ] key to make the following screen
appear on the display.
2
AUTO SHEET CUT
DISABLE DISABLE
Use the [ ] key to select [ENABLE], then press the
[ENTER] key.
3
AUTO SHEET CUT
DISABLE ENABLE
The material-separating location during
continuous output
Start of the next output
End of output
* When the material-cutting command has not been set to "enabled" at the computer, automatic separation of
the material is not performed, even when the following setting is made.
When sending a material-cutting command from the computer
to separate the material automatically
Remove the Material
10 mm
(3/8 in.)
Location where separated 10 mm (3/8 in.)
Margin (value set for [PAGE MARGIN])
Attempting to return or cut off material that has not been allowed to dry sufficiently after printing may soil or damage
the printed surface. Make sure the printed surface has dried sufficiently before you return or cut off the material.