Roland SolJet SJ-500, Руководство пользователя

Страница: 17 / 77

15
What to Do upon Opening the Carton
Use the joining screws to secure the
unit to the stand.
Failure to do so may
result in falling of the
unit, leading to
injury.
Use care to avoid pinching the
fingers when placing the unit on the
stand.
Doing so may
result in injury.
Invert the stand legs as shown in the
figure. While supporting the stand legs
with your hand, attach the left- and right-
hand casters.
Tighten the bolts securely. Loose bolts
may cause the stand to wobble.
First assemble the stand, then mount the machine on top of the stand.
The external dimensions of the assembled machine and stand are as follows.
SJ-600: 2500 mm [W] x 758 mm [D] x 1241 mm [H] (98-7/16 in. [W] x 29-7/8 in. [D] x 48-7/8 in. [H])
SJ-500: 2246 mm [W] x 758 mm [D] x 1241 mm [H] (88-7/16 in. [W] x 29-7/8 in. [D] x 48-7/8 in. [H])
1
4 pcs.
Short
Pipe
4 pcs.
Hexagonal wrench
Long
Bolts (Large)
Unpacking, installation, and moving
must be carried out by four or more
persons.
Otherwise the machine or the stand may fall,
resulting in injury.
When lifting the machine, do not grasp the
areas shown in the figure.
Doing so may damage the equipment.
Left-hand side of the
back of the unit Right-hand side of the
back of the unit
NOTICE
2 Assembling the Stand and the Machine
Continued on the next page.