Roland SJ-540, Руководство пользователя

Страница: 38 / 102

36
Chapter 2 - Basic Operation
2-2 Loading Media
8
Slowly turn the media flanges at the back of the machine to pull back the media to the position shown
in the figure.
When you roll back the media until the sensor comes into view, a tight seal is formed between the media and the platen, and
the media is stretched taut.
9
With the media pulled out from the roll stretched
taut with no slack, move the sheet loading le-
ver toward LOAD.
The pinch rollers lower to hold the media in place.
10
Close the front cover, and press the [SETUP]
key. This detects the width of the media and
displays the printable width.
W 1234 mm
Top menu
The SETUP LED lights up
When the machine will remain unused for an extended period, remove roll media from the machine and store it.
If roll media is left mounted on the machine for an extended period, these entire roll may warp, resulting in poor printed image
quality or motor errors.
When transparent media is loaded, it is necessary to set [SHEET TYPE] to [CLEAR]. For more information, see "3-5 Using
Transparent Media".
When changing to a different type of media, it may be necessary to perform feed correction or bidirectional correction. For more
information, see "3-6 Making Corrections for Printing".
For information about the conditions of media that can be used and loadable media widths, see "7-2 Media Conditions."
Entire media stretched taut
Sensor
Pull back the media
here.