Roland SJ-540 Скачать руководство пользователя страница 28

Страница: 28 / 102

Chapter 1 - Getting Started

1-4 Connecting the Cables

Connecting the Power Cord

Rear

Power Connector

Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause failure during
operation. Doing so may lead to faulty operation or breakdown.

Before connecting the cable, make sure the computer’s power and the main power switch of the unit are switched off.

Arrange the power cord and interface connection cable to prevent tripping when moving around the unit.

Use only with a power supply of the same rating as indicated on the unit.
Use with any other power supply may lead to fire or electrocution.

Ground the unit with the ground wire.
Failure to do so may result in risk of electrical shock in the even of a mechanical problem.

Use only with the power cord included with this product.
Use with other than the included power cord may lead to fire or electrocution.

Power outlet

Power connector

Power cord

Содержание SJ-540







































































































Результаты поиска

Содержание SJ-540

Отзывы:

Бренды по названию

Популярные бренды

Roland SJ-540, Руководство пользователя

Результаты поиска

Содержание SJ-540

Отзывы:

Бренды по названию

Популярные бренды