Roland RD-700NX страница 76 Скачать руководство пользователя

Страница: 76 / 106

Detailed Settings for Each Function

File Management

Saving a Live Set File (LIVE SET Save)

A single, individual file containing a collection of 100 Live Sets

registered to the RD-700NX is called a “Live Set file.”
This Live Set file can be saved in the RD-700NX’s internal memory or

on USB memory (sold separately) connected to the USB MEMORY

connector.

MEMO

If you want to save the changed settings of a system parameter

(p. 122), memorize settings by pressing the [LAYER EDIT] (WRITE)

button, then save an Live Set file.

Press the [MENU] button, getting the indicator to light .

The Menu screen appears.

Press the Cursor [

] [

] buttons to select “5 .File,” then

press the [ENTER] button .

The Edit screen appears.

Press the Cursor [

] button to select “0 . Live Set Save,” then

press the [ENTER] button .

The following screen appears.

Press the [LAYER EDIT] (MEDIA) button to select the save

destination for the Live Set file .

Value

Description

INT

The data will be stored in the RD-700NX’s internal

memory.

USB

The data will be stored on USB memory connected to

the USB MEMORY connector on the rear panel.

Press the Cursor [

] [

] buttons to move the cursor to the

positions where the characters are to be input .

Use the [DEC] [INC] buttons or the VALUE dial to enter the

name .

Names can consist of up to 16 characters.
The following characters are available.
space ! # $ % & ‘ ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z { } ~
When the [TONE EDIT] (DELETE) button is pressed, a single-character

blank space is inserted; while holding down the [SHIFT] button, press

the [TONE EDIT] (INSERT) button to delete one character.

NOTE

You can’t save a Live Set file with a name that starts with a “.

(period)”. Do not use a “. (period)” at the beginning of the name.

Repeat steps 5–6 to input the name .

When you’ve finished entering the file name, press the

[ENTER] button .

The Live Set file will be saved.

NOTE

“Executing...” appears in the display while the save is in progress. Be

sure never to turn off the power.

MEMO

If a file with the same name has already been saved, the

confirmation message “Overwrite OK?” appears. To overwrite the

Live Set file, press the [ENTER] button; to save the file under a

different name, press the [EXIT/SHIFT] button.

Press the [MENU] button, extinguishing its indicator .

You’ll be returned to the Live Set screen or the One Touch screen.

Содержание RD-700NX











































































































Результаты поиска

Содержание RD-700NX

Отзывы:

Похожие инструкции для RD-700NX

Бренды по названию

Популярные бренды

Roland RD-700NX, Руководство пользователя

Результаты поиска

Содержание RD-700NX

Отзывы:

Похожие инструкции для RD-700NX

Бренды по названию

Популярные бренды