Roland RD-700NX, Руководство пользователя

Страница: 72 / 106

73
Detailed Settings for Each Function
Assigning Functions to the [S1] [S2] Buttons
(S1/S2 Assign)
This setting determines the function of the [S1] and [S2] buttons.
Parameter Value
Function/
Parameter Setting Changed
S1/S2
00: OFF No control
01:
1OCT
Playing a key will also sound
an additional note one octave
higher.
02:
COUPLE -1OCT
Playing a key will also sound an
additional note one octave lower.
03:
2OCT
Playing a key will also sound
an additional note two octave
higher.
04:
COUPLE -2OCT
Playing a key will also sound an
additional note two octave lower.
05:
5TH
Playing a key will also sound
an additional note a fifth (7
semitones) higher.
06:
COUPLE -4TH
Playing a key will also sound
an additional note a fourth (5
semitones) lower.
07:
OCTAVE UP
Each time you press the button,
the keyboard range will rise by
an octave (maximum 4 octaves).
08:
OCTAVE DOWN
Each time you press the button,
the keyboard range will lower by
an octave (maximum 4 octaves).
09:
START/STOP
The external sequencer will start/
stop.
10:
TAP TEMPO
The tempo will be modified to
the interval at which you press
the button.
11:
SONG PLY/STP
Starts and stops the song (p. 38).
12
SONG RESET
Returns you to the beginning of
the song.
13
SONG BWD
Rewinds the song.
14
SONG FWD
Fast-forwards the song.
15:
MFX1 SW
Turns on/off multi-effect 1 (p. 41)
for the layer specified by MFX
Control Destination.
16:
MFX2 SW
Turns on/off multi-effect 2 (p. 41)
for the layer specified by MFX
Control Destination.
17:
ROTARY SPEED
When using the rotary
effect, switches the rotary effect
between slow and fast.
Assigning Functions to the LAYER LEVEL
Sliders (Slider Assign)
Here you can assign the function that the LAYER LEVEL sliders will
perform when the CONTROL indicator is lit.
Parameter Value
Function/
Parameter Setting Changed
UP1/UP2/
LW1/LW2 (Slider
Assign)
00: OFF No control
CC00–CC127
Controller Numbers
0–127
129:
BEND UP
Raises the pitch
130:
BEND DOWN
Lowers the pitch
131:
AFTERTOUCH
Controls After Touch
132:
MFX1 CTRL
Adjusts the amount of
multi-effect 1 (p. 41) for the
layer specified by MFX Control
Destination.
133:
MFX2 CTRL
Adjusts the amount of
multi-effect 2 (p. 41) for the
layer specified by MFX Control
Destination.
Specifying the Destination Layer for Multi-
Effect Control (MFX Ctrl Dest)
Here you can specify the layer that will be affected when using FC1/
FC2, S1/S2, or a slider to control the multi-effect.
Parameter Value Description
MFX Ctrl Dest
(MFX Control
Destination)
UPPER 1, UPPER 2,
LOWER 1, LOWER 2
The multi-effect of the layer you
specify here can be controlled.
Changing the Harmonic Bar Settings
(Harmonic Bar)
Refer to the “Changing the Layer LEVEL Slider Feet Assignments” (p. 43)