manualshive.com logo in svg

Roland RD-700NX, Руководство пользователя

Поделиться
Скачать
Roland RD-700NX Скачать руководство пользователя страница 30

31

Performance

 Adjusting the Volume Level for Individual Layers

With the RD-700NX, each of the parts that is performed using the internal sound generator is referred to as a Layer.
For each layer (UPPER 1, UPPER 2, LOWER 1, LOWER 2), you can use the Layer switch and Layer LEVEL slider to turn the sound on/off  and adjust its 

volume.

Layer

Switch

Layer 

LEVEL

Sliders

   Layer Switch

These buttons turn each layer on/off .
Layers for which the Layer switch indicator is lit (on) will produce sound when you play the keyboard.
Layers for which the Layer switch indicator is unlit (off ) will not produce sound even if you play the keyboard.
Each Layer switch will alternately turn on/off  each time it is pressed.

   Layer LEVEL Slider

Adjusts the volume of an individual layer.
When a layer’s Layer switch indicator is not lighted, no sound is produced for the layer even when the slider is moved.

MEMO

Use the [VOLUME] slider when adjusting the overall volume level (p. 18).

NOTE

If the CONTROL indicator is lit, you can’t use the Layer LEVEL sliders to adjust the volume (p. 73).

Содержание RD-700NX











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды