Roland RD-700NX Скачать руководство пользователя

Страница: 6 / 106

IMPORTANT NOTES

Using USB Memories

704

•

Carefully insert the USB memories all the way in; until it is firmly in

place.

705

•

Never touch the terminals of the USB memories. Also, avoid getting

the terminals dirty.

708

•

USB memories are constructed using precision components; handle

the USB memories carefully, paying particular note to the following.

•

To prevent damage to the USB memories from static electricity, be

sure to discharge any static electricity from your own body before

handling the USB memories.

•

Do not touch or allow metal to come into contact with the contact

portion of the USB memories.

•

Do not bend, drop, or subject USB memories to strong shock or

vibration.

•

Do not keep USB memories in direct sunlight, in closed vehicles, or

other such locations.

•

Do not allow USB memories to become wet.

•

Do not disassemble or modify the USB memories.

Handling CDs / DVDs

801

•

Avoid touching or scratching the shiny underside (encoded surface)

of the disc. Damaged or dirty CD discs may not be read properly. Keep

your discs clean using a commercially available CD cleaner.

Copyright

851 (C-01-1)

•

Recording, duplication, distribution, sale, lease, performance, or

broadcast of copyrighted material (musical works, visual works,

broadcasts, live performances, etc.) belonging to a third party in

part or in whole without the permission of the copyright owner is

forbidden by law.

853 (C-01-2)

•

Do not use this product for purposes that could infringe on a copyright

held by a third party. We assume no responsibility whatsoever with

regard to any infringements of third-party copyrights arising through

your use of this product.

(C-03-4)

•

The copyright of content in this product (the sound waveform data,

style data, accompaniment patterns, phrase data, audio loops and

image data) is reserved by Roland Corporation.

(C-03-5)

•

Purchasers of this product are permitted to utilize said content for

the creating, performing, recording and distributing original musical

works.

(C-03-6)

•

Purchasers of this product are NOT permitted to extract said content

in original or modified form, for the purpose of distributing recorded

medium of said content or making them available on a computer

network.

240 (2a-2)

•

MMP (Moore Microprocessor Portfolio) refers to a patent portfolio

concerned with microprocessor architecture, which was developed

by Technology Properties Limited (TPL). Roland has licensed this

technology from the TPL Group.

238 (2a-5)

•

MPEG Layer-3 audio compression technology is licensed from

Fraunhofer IIS Corporation and THOMSON Multimedia Corporation.

203

•

GS (

) is a registered trademark of Roland Corporation.

220 (3c-T-01)

•

All product names mentioned in this document are trademarks or

registered trademarks of their respective owners.

Содержание RD-700NX











































































































Результаты поиска

Содержание RD-700NX

Отзывы:

Похожие инструкции для RD-700NX

Бренды по названию

Популярные бренды

Roland RD-700NX, Руководство пользователя

Результаты поиска

Содержание RD-700NX

Отзывы:

Похожие инструкции для RD-700NX

Бренды по названию

Популярные бренды