Roland Picza LPX-600, Руководство пользователя

Страница: 40 / 64

3-4 Finishing the Data
You take the data from basic scanning and modify it to produce finished data that has the form you want.
Selecting and Scanning a Specific Area
After the basic scanning, you can select specific areas and performing additional scanning (rescanning). The available types of
rescanning are as follows.
Rescan
You use rescanning when you want to increase the number of measuring points (scan points) and enhance the degree of comple-
tion of the 3D data.
Line Scan/Point Scan
You use line scanning and point scanning when you want line-segment or point data to serve as supplemental data for three-
dimensional modeling operations using CAD or computer-graphics programs.
Perform coarse scanning
of the entire object.
Rescan required
areas in detail.
You can reproduce detailed
surface patterns.
Even when holes are present...
The holes are sealed, yielding
the same shape as the original!
...you rescan just
these areas.
Perform line scanning with
Dr. PICZA3...
...and re-create the
curved surfaces with
the 3D CAD program!
Perform point scanning with
Dr. PICZA3...
...and re-create the curves
with the 3D CAD program!
38