Roland Kiwitechnics KIWI-SJX Скачать руководство пользователя | Manualshive

Страница: 28 / 89

background image

28

C) Playing

Load Sequence

A Sequence can be loaded in two
ways. A Sequence is loaded

manually

by pressing SEQ LOAD followed by a
Number   Pad   Button   1-8.   The
Sequence   that   is   stored   under   the
Number   Pad   button   selected   will   be
loaded to memory

.

A Sequence can be assigned to a
Tone and can load

automatically

when the Patch including that tone is
loaded. To do this place the Sequence
number   1-8   in   the   Load   Sequence
Field   in   the   Tone   Parameter   Editing
(midi   editing   only)   or   save   the   Tone
with   the   sequence   running.   Place   a
zero in this field if you do not want a
Sequence   to   load   or   save   the   tone
with the sequence stopped. The last
Sequence   will   stay   in   memory   and
continue   to   play   (if   enabled)   in   this
case.

Note: The sequence output will follow
the currently selected Patch Key
mode rules, Whole, Dual or Split.

If you press the SEQUENCER button
the   indicator   on   the   button   will   light
and   the   data   written   into   the
sequencer   will   be   played.

The first

note of the sequence will only sound
once a clock has been received.

This

allows   a   seq   to   be   queued   to   start.
When all the notes are played the data
will   return   to   the   beginning   and   be
played again from the start. Pressing
the   SEQUENCER   button   once   more
will   stop   the   sequence   playing
immediately. The tempo of the playing
will   be   determined   by   the   clock
source.   If   the   clock   source   is   the
Internal Clock then the tempo will be
set  by   the   Master  Clock.  Both   clock
sources can be further divided using
the SEQ STEP TIMING button.

* If you stop the Sequence part

way through and then restart it
the data will start from the
beginning.

* If you wish to only play the data

once, put some rests are the
end so it is easier to stop the
sequence in the correct place.

It is possible to play along with the
sequencer.   The   Sequence   output
follows   the   same   rules   as   playing
notes. The sequencer output uses 1-
6 of the available voices  which  can
be   up   to   12   if   Whole   mode   or   6   if
Dual mode is in use. Beyond this the
note   stealing   rules   that   have   been
specified   in   parameter   431   (Voice
Steal Mode).

Note - If a new sequence or Patch is
loaded   while   a   sequence   is   playing
the   load   of   the   Patch   and   Seq   will
delay   until   the   current   sequence
reaches the end and is about to loop
back   to   the   start   At   this   point   the
Patch   and   Sequence   (if   auto   load
enabled) will then load and the next
note(s) to sound will be with the new
selection.

If the Sequencer is on (Sequencer
Button light on) when a Patch or Tone
is saved the Sequencer will
automatically load when the patch is
selected.

www.kiwitechnics.com

JX-SJX Upgrade User Manual v100

«
...
26
27
28
29
30
...
»

Содержание Kiwitechnics KIWI-SJX


























































































Отзывы:

Нет отзывов

Похожие инструкции для Kiwitechnics KIWI-SJX

Kronos Analogic

Бренд: Korg Страницы: 20

Бренд: Roland Страницы: 3

Бренд: Roland Страницы: 54

Future Impact I

Бренд: Panda-Audio Страницы: 17

'14 Analogsynthesizer

Бренд: Vermona Страницы: 76

Бренд: Tone2 Страницы: 33

Basimilus Iteritas Alter

Бренд: Noise Engineering Страницы: 8

Бренд: Korg Страницы: 5

Бренд: Korg Страницы: 10

Бренд: Korg Страницы: 22

Бренд: Korg Страницы: 12

Бренд: Korg Страницы: 16

Бренд: Korg Страницы: 25

Бренд: Korg Страницы: 56

Бренд: Korg Страницы: 47

CX-3 Combo Organ

Бренд: Korg Страницы: 48

Бренд: Korg Страницы: 80

Бренд: Korg Страницы: 75

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды