Roland Kiwitechnics KIWI-SJX Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 89

Roland Kiwitechnics KIWI-SJX Скачать руководство пользователя страница 25

25

Edit Buffer Compare

Whenever the edit buffer does not
match the saved Patch or Tone
showing on the display the three
decimal points on the G/B/T part of
the display will be lit.

The left most point will light if the
Patch header does not match.

The center point will light if the
Lower voice does not match the
edit buffer.

The right point will light if the
Upper voice does not match the
edit buffer

To retain these changes when the
Patch or Tone is changed or the
JX-10 is powered off the Patch
must be written to memory.

LFO Generators

The   Kiwi-SJX   has   3   independent
LFO   generators   on   each   voice
board.   These   each   have   6
waveforms   and   can   be   free
running or sync'd with the master
clock with a divider. Each LFO has
it's   own   sync   divider   with   16
possible   divide   ratios   including
swing options.

Each LFO can be Normal or Plus
mode. Normal will move the base
above and below the normal
parameter level and plus mode
will only move the base level up.
Each section of the Kiwi-SJX that
uses LFO input can select from
one of the 3 LFOs.

Envelopes

The   Kiwi-SJX   has   three
independent   Envelope   Generators
on   each   voice   board.   The
Envelopes   generated   are   also
available   as   Matrix   sources.
Envelopes 1-3 are the DADSR type.

Clock Display

The   three   clocks   in   the   Kiwi-SJX
can be displayed on the front panel
lights   if   desired.   As   this   can   be
distracting   we   have   made   these
optional.

The Global Tempo will display on
the LED above the MIDI button

These can be set or cleared using
sysex or by using the front panel
buttons.

Press and Hold GLOBAL
TEMPO at power on to toggle
the Master Clock display.

Press and Hold ARP STEP at
power on to toggle the ARP
clock display.

In the JX-10 only press and Hold
SEQ   STEP   at   power   on   to
toggle   the   Sequencer   Clock
display.   This   option   is   not
available in the MKS-70 version.

www.kiwitechnics.com

JX-SJX Upgrade User Manual v100

«
...
23
24
25
26
27
...
»

Содержание Kiwitechnics KIWI-SJX


























































































Отзывы:

Нет отзывов