Roland JV-2080, Дополнительные заметки

Страница: 13 / 16

®ÂØÒňΠSupplemental Notes JV-2080 Frequently Asked Questions
In most synthesizers and/or sound modules, using direct
outputs disables any internal effects processing before the
signal passes through the outputs. This is fine when you are
processing the signal with an external effects processor, but
let’s say you wanted to use an internal effect and an exter-
nal processor on the same signal; The JV-2080 allows you
to route a Part through one of its insert effect processors
before it passes through the direct output jacks. Use the fol-
lowing procedure to apply an insert effect to a Part and then
route it through a direct output:
1) Press PERFORM.
2) Press F5[EFFECTS] to display the Effects page.
3) Press F6 until the General page (see Fig. 8) is
displayed.
4) Use the CURSOR buttons to the
select the “Output” parameter.
5) Use the VALUE dial to select “EFX-A,”
”EFX-B,” or “EFX-C.”
6) Press CURSOR RIGHT three times
and CURSOR DOWN twice to select
the EFX Output Assign parameter.
7) Use the VALUE dial to select DIR1 or DIR2 depending
on which set of direct outputs you wish to use.
The selected Part will use an insert effect (EFX) routed
through the direct output (1/2).
Certain effects parameters can be modified in realtime
by controllers, adding an additional element of expres-
siveness to a Performance. These controllers include
aftertouch (key pressure), modulation, foot pedal, or a
special type called “System Controllers.” System
Controllers allow you to globally assign a MIDI controller
message to one of two System Controller locations. For
example, the JV-2080 contains many Patches that
respond to aftertouch. Let’s say you are using a key-
board that transmits modulation but does not transmit
aftertouch. Because most of these Patches are pro-
grammed to respond to aftertouch as a System
Controller, you can reassign modulation as a System
Controller, in place of aftertouch, and use it to control
the Patches in the JV-2080.
©1999 Roland Corporation U.S. JV-2080 Frequently Asked Questions Faxback # 21074 Page 13
XII. How Do I Use System Controllers?
XI.
How do I Route Parts Through the Direct Outputs
Using an Insert Effect (EFX)?
F Fiig g.. 8 8
E Effffe ec cttss//O Ou uttp pu utt
A Assssiig gn n P Pa ag ge e