Roland JUNO-X Скачать руководство пользователя

Страница: 7 / 56

Panel Descriptions

OSC (oscillator) section

[PWM/MOD] slider

Changes the waveform modulation, such as the duty cycle of

the square wave.

[

] slider

Adjusts the level of the square wave or asymmetrical square

wave.

[ ] slider

Adjusts the level of the sawtooth wave.

[SUB] slider

Adjusts the level of the sub oscillator.

[NOISE] slider

Adjusts the level of the noise.

[PITCH] (DETUNE) slider

Adjusts the pitch of the oscillator.
Also, you can press the [PART/FUNC] button to make it light up

blue and then use the [PITCH] (DETUNE) slider to detune the

pitches of the two oscillators.

[SUPER SAW] button

* This button is enabled only when “JUNO-X” is selected for the model.

When this button is on (lit), use the [PWM/MOD] slider to adjust

how much the sawtooth wave is overlapped, and use the [ ]

slider to adjust the level.

[PART LEVEL] button

When this button is on (lit), you can use the corresponding

sliders to adjust the volume of parts 1–R.

HPF (high-pass filter) section

[FREQ] slider

Specifies the cutoff frequency of the high-pass filter. The

frequency components below the cutoff frequency are cut off.

FILTER section

[FREQ] slider

Adjusts the cutoff frequency of the filter.

[RES] slider

Emphasizes the frequencies around the filter’s cutoff frequency.
Larger values produce greater emphasis, creating a unique

synthesizer-like sound.

[KYBD] slider

Varies the filter’s cutoff frequency according to the position of

the key.
Raising the slider increases the value, and the cutoff increases

with higher notes. Lowering the slider decreases the value, and

the cutoff decreases with lower notes.

VINTAGE FILTER [R] [M] [S] buttons

If a vintage type model is selected, these buttons change the

type of filter.
[R] models a Roland filter, and [M] and [S] model the filters of

vintage synthesizers made by other manufacturers.

AMP section

[LEVEL] knob

Adjusts the volume.

[GATE] button

When this button is on (lit), the notes play at a specific volume

only while you press the keys.

ENV (envelope) section

[A] [D] [S] [R] sliders

These sliders control the envelope, which creates time-based

changes to the sound.

Attack time (the time it takes for the

sound to rise)

Decay time (the time it takes for the

sound to attenuate)

Sustain level (the level at which the

sound sustains)

Release time (the length of time that the sound lingers)

[DEPTH] slider

Used in conjunction with the [PITCH] button and [FILTER]

button, this slider specifies the depth of each envelope. No

effect is applied when the value shown onscreen is zero.

[PITCH] button

If this button is on (lit), use the [DEPTH] slider and [A] [D] [S] [R]

sliders to edit the pitch envelope.

[FILTER] button

If this button is on (lit), use the [DEPTH] slider and [A] [D] [S] [R]

sliders to edit the FILTER envelope.

[AMP] button

If this button is on (lit), use the [A] [D] [S] [R] sliders to edit the

AMP envelope.

EFFECTS section

[DRIVE] knob

Adjusts how much distortion is applied to the sound (applies to

all parts, but enabled only for parts whose Part:Output is set to

“DRIVE”).

[REVERB] (TIME) knob

Adjusts the depth of reverb (individually for each part).
Also, you can press the [PART/FUNC] button to make it light

up blue and then operate the [REVERB] (TIME) knob to set the

reverb length.

[CHORUS] knob

Adjusts the amount of chorus (individually for each part).

[MFX] knob

Adjusts the MFX depth (individually for each part).

[DELAY] knob

Adjusts the amount of delay (individually for each part).

[TIME] (FEEDBACK) knob

Adjusts the delay time (for all parts together).
Also, you can press the [PART/FUNC] button to make it light up

blue and then operate the [TIME] (FEEDBACK) knob to adjust

the amount of delay feedback.

JUNO CHORUS [I] [II] [III] buttons

Selects the chorus type.

* More than one button can be selected at the same time.

Содержание JUNO-X

























































Результаты поиска

Содержание JUNO-X

Отзывы:

Похожие инструкции для JUNO-X

Бренды по названию

Популярные бренды

Roland JUNO-X, Справочное руководство

Результаты поиска

Содержание JUNO-X

Отзывы:

Похожие инструкции для JUNO-X

Бренды по названию

Популярные бренды