23
Performance Mode
Effects Edit
In Performance mode you can use three multi effects (MFX1–3), one chorus, and one reverb. For each of the three MFX, the chorus, and the reverb, you can specify whether it
will operate according to the effect settings of the performance, or according to the effect settings of the patch or drum kit assigned to the part you specify.
The three MFX can be used independently, or you can connect two or three of them in series.
Signal Flow
Make these settings in the “OUTPUT” tab of
the PART EDIT screen.
1
Output Level
2
Cho Send Level
3
Rev Send Send
4
Output Assign
5
Output MFX Sel
Make these settings in the “MFX1–3” tab of the
EFFECTS EDIT screen.
6
MFX Type
7
Output Level
8
Chorus Send Level
9
Reverb Send level
Make these settings in the “CHORUS” tab of
the EFFECTS EDIT screen.
10
Chorus Type
11
Chorus Level
12
Output Select
Make these settings in the “REVERB” tab of the
EFFECTS EDIT screen.
13
Reverb Type
14
Reverb Level
Procedure
1 .
Press the [SAMPLE IMPORT] button and [DAW CONTROL] button
simultaneously.
The EDIT MENU screen appears.
2 .
Move the cursor to “EFFECTS EDIT,” and press the [ENTER] button.
The EFFECTS EDIT screen appears.
3 .
Move the cursor to tab, and use the [
K
] [
J
] buttons to switch the pages.
4 .
Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
5 .
To save the edited settings, perform the operation “Saving Your Settings
(Write)” (refer to owner’s manual).