Roland HPi-50e, Руководство пользователя

Страница: 36 / 80

& &
Recording
It’s easy to record your own performances.
You can play back a recorded performance to check your playing, or perform along with a recorded performance.
The HPi-50e can record SMF and audio.
SMF Recording and Audio Recording
Type of recording Explanation
SMF recording
The musical performance is recorded as data that describes everything that happened, such as which notes were played, and for how
long and how strongly.
This method of recording allows you to record the parts separately, or to re-record just a specific region of the song. You can also do
overdubbing.
A song recorded using SMF recording can be viewed as a DigiScore in the notation screen.
* Normally, you should use SMF recording.
Audio recording
Your performance will be recorded as audio data. The recorded song can be used on your computer.
* In order to use audio recording, you must connect a USB flash drive (sold separately) to the USB memory port (p. 17).
* The HPi-50e’s piano sound reproduces the depth and spatial feel of a piano by emitting different sounds from the multiple speakers built
into the instrument (Acoustic Projection).
If you record your performance as audio, the song will be recorded as two-channel (stereo) data, meaning that the Acoustic Projection
effect will not be reproduced. (The Acoustic Projection effect is reproduced when you play the keyboard or when you play back a song
that was recorded as SMF data.)
Getting Ready to Record
1.
Hold down the [Key Touch] button and press the [Transpose] button to access the setup screen .
2.
Choose the desired recording method .
Recording method Value Explanation
Recording Mode
SMF The song will be recorded in SMF format.
Audio The song will be recorded in audio format.
Mix Recording
Off
When you record over existing material, the previously recorded part will be erased as
the new performance is recorded.
On
When you record over existing material, the newly recorded performance will be
combined with the existing performance of the recorded part.
MEMO
You can also change the recording mode by holding down the record button and using the cursor [ ] [ ] buttons.
3.
If you want to overdub an SMF song, select the song that you want to overdub (p . 31) .
* You can’t overdub onto an audio song.
4.
Select the tone that you want to use for performing (p . 20) .
5.
If desired, sound the metronome (p . 30) .
How the recorded parts correspond to the part buttons
The recorded performance is assigned to the part buttons as follows.
Conventional Play (playing one tone from the entire keyboard)/Dual Play
Part button Performance that will be recorded
Record with only one part
specified
Your performance will be recorded on the part you specified.
Record with multiple parts
specified
[Right] [Left] parts [Accomp] part.
* SMF (Standard MIDI File) is a unified format for handling MIDI-format music data. A wide variety of SMF data can be purchased for listening
enjoyment, instrumental practice, or karaoke.
36