English
Deutsch
Français
Italiano
Español
53
Using effects
1.
While in playback or in recording-standby mode, press the R-1’s
EFFECT button
to
turn it
on
(lit).
2.
Press the
EDIT button
. You will enter Edit mode.
3.
Use the
VALUE dial
to select the desired type of effect, and then press the
ENTER
button
.
Each effect has various “parameters” (settings) that adjust the effect. When you
select an effect type, its parameters will have the default settings.
When you change the effect type, the currently set parameter values are cleared.
* If you decide not to change the effect type, press the
EXIT button
or the
EDIT button
to leave
Effect mode.
4.
Now you can select a parameter. Use the
VALUE dial
to select a parameter, and
then press the
ENTER button
.
* If you decide not to select a parameter, press the
EDIT button
to leave Effect mode.
* If you want to return to the effect selection, press the
EXIT button
.
5.
Now you can edit the parameter. Use the
VALUE dial
to specify the desired value
for the parameter, and then press the
EXIT button
.
6.
Press the
EDIT button
to leave Effect mode.
If you want to return to the parameter selection, press the
EXIT button
.
The effect parameter settings you make are remembered until you change
them.
R-1_egfis1.book 53 ページ ２００５年１１月１１日 金曜日 午後５時１３分
Содержание Edirol R-1
Страница 156: ...R 1_egfis1 book 156 ページ ２００５年１１月１１日 金曜日 午後５時１３分 ...
Страница 157: ...R 1_egfis1 book 157 ページ ２００５年１１月１１日 金曜日 午後５時１３分 ...
Страница 158: ...R 1_egfis1 book 158 ページ ２００５年１１月１１日 金曜日 午後５時１３分 ...
