Roland Edirol R-1, Руководство пользователя

Страница: 18 / 160

18
Getting ready to use the R-1
* Before making connections with other equipment, you must minimize the volume and turn
off the power of all of your equipment in order to prevent malfunction and/or speaker
damage.
* If you use a cable with a built-in resistor, the volume of the device connected to the line input
jack (LINE IN) may be too low. If so, you should use a connection cable that does not contain
a resistor.
fig.basic_50
The R-1 does not have built-in speakers. In order to hear the playback, you will need to
provide headphones or speakers.
You can use the R-1’s headphone jack as a digital output (optical out) for connection to
a digital device, or as a line output for connection to an analog device. Use the
appropriate cable for your device.
For details, refer to
“Connecting headphones” (p. 22), “Connecting digital speakers
(digital devices)” (p. 23), or “Connecting analog speakers (analog devices)” (p. 24).
* Howling could be produced depending on the location of microphones relative to speakers.
This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
Basic connections
Computer
CD/MD player for playback
Stereo mic
Headphones
AC adaptor
USB
USB
MIC
LINE IN
PHONES
(OPTICAL) DC IN
MD player or similar for recording
LINE OUT
DIGITAL IN
R-1_egfis1.book 18 ページ ２００５年１１月１１日 金曜日 午後５時１３分