Roland Edirol M-16DX Скачать руководство пользователя страница 17

Страница: 17 / 60

Names of things and what they do

37. DISPLAY Button

When you press this button, the level meter screen will
appear, indicating the input levels (pre EQ) of all input
channels.

fig.02-DISPLAY.eps

The DISPLAY button’s light will go out when you press
another button to switch to something other than the level
meter screen.

From any screen, you can press the DISPLAY button to access
the level meter screen.

* In order to mix with the least possible noise and distortion,

adjust the SENS knob so that the top “

” of the level meter

in the display does not light when the input signal is loudest.

38. SCENE Button

Press this when you want to register the current settings as a
“scene” or call up a previously registered scene.

➝

“Saving and calling up mixer settings (Scenes)” (p. 43)

fig.C-rear

39. PHONES Jack

This is a stereo 1/4” phone jack for connecting stereo
headphones.

40. CONTROL ROOM Jacks (L, R)

These are 1/4” phone jacks that output the same sound as the
PHONES jack.

Connect to these if you're using nearfield powered monitors
instead of headphones.

41.
LINE IN (AUX RETURN 2) Jacks (15L, 16R)

These are 1/4” phone line input jacks. If you’ve connected the
AUX SEND 2 jacks to an external effects processor, use these
jacks to input the output signal from the external effects
processor.

42. LINE IN (STEREO) Jack (15/16)

This is a 1/8” stereo mini-type line input jack that’s
convenient for connecting a portable audio device such as an
MP3 player.

43. ROOM ACOUSTIC SENSOR

This sensor detects the frequency response of the room
acoustic auto control.

➝

“Automatic adjustment (Room Acoustic Auto Control)”
(p. 35)

* A mic connected to channel 1 can also be used as the sensor.

➝

“Switching the room acoustic sensor (RAC SOURCE)” (p.
44)

44. DX BUS Connector

Use the included cable to connect this to the DX BUS
connector of the I/O module.

Do not connect it to a computer or display.

45. Function Switches

You can make various settings using these switches.

➝

“Changing the function switches” (p. 44)

Rear panel

Содержание Edirol M-16DX





























































Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды

Roland Edirol M-16DX, Руководство пользователя

Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды