Roland DWX-51D, Руководство пользователя

Страница: 34 / 64

34
3. Maintenance
Daily Maintenance
Cleaning after Milling Finishes
After milling finishes, clean the milling area using a commercially available brush or the dust collector. Also clean the milling bur.
Procedure

Clean the inside of machine.
Use the VPanel Cleaning tool dialog box to clean the rotary axis unit. Clean off any milling waste around areas to
in the following figure, as milling waste in these areas may affect the milling results.
 P. 15""Cleaning tool" Dialog Box"
When the machine is in the standby state, opening the front cover and pressing the operation button will turn on the
dust collector. (For dust collectors with a linking function and connected to the expansion port with a linking cable.)
For details on the dust collector, see the DWX-51D "Setup Guide."
Do not directly touch
the inside of the ionizer.
With the dust collector operating,
use a commercially available brush
to brush off the milling waste, and
use the dust collector to pick up
the milling waste.