Roland DWX-51D, Руководство пользователя

Страница: 11 / 64

VPanel Window and Functions
1. Operation Screen
11
"Manual correction" Dialog Box
In this dialog, you can make corrections of the milling machine manually. Perform corrections if you want to precisely adjust
the accuracy. When more than one machine is connected, the machine selected in the top window is the target of corrections.
* Perform automatic correction before performing this correction.
Display Explanation
Distance
Correct moving distances in the X, Y, and Z directions. Set the correction value
while considering the initial moving distance as 100.000 %.

Initial setting: 100.000 %
A axis back side
Correct the angle when the A axis is rotated 180 degrees. Set the correction
value while considering the initial setting as 0.00 degrees.

Initial setting: 0.00 degrees
Origin point
Correct the origins of the X, Y, and Z axes. Set the correction value while
considering the setting initial setting as 0.00 mm.
 Initial setting: 0.00 mm
Clear these values when exe-
cuting the automatic correction
Check to reset the values for "Distance," "Origin point," and "A axis back side"
when performing automatic correction.

Initial setting: Checked