Roland DU2-64, Руководство пользователя

Страница: 19 / 40

17
Chapter 1 Introduction
1-4 Installing on the Printer
Step1: Install the Drying-heater Unit
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
1.
Attach the arms.

Referring to the figure below, assemble the right and left arms.
After tightening the bolts temporarily, tighten them completely (Two bolts for each arm).
There is no right/left distinction in arm assembly parts; however, arms assembled for right or left side are treated as
right or left arms, respectively.

Remove two bolts from each of the positions shown in the figure.
Bolt Bolt
Hexagonal
wrench
Hexagonal
wrench
Arm (right)
Arm (left)