26
Data Setting
G10
Format
G10L2P
coordinate
[X
x
][Z
z
]
G10[P
number
][R
offset
]
Z
X
Y
Machine coordinate origin point
Z
X
Y
Workpiece
coordinate system 1
Workpiece
coordinate system 1
Workpiece origin
point offset amount
Amount of offset
by G10
Description
This sets the amount of shift for workpiece coordinate systems as well as the amount of offset used by the cutter compensation and tool-
length compensation.
Setting the Amount of Shift for Workpiece Coordinate Systems
This sets the amount of shift for workpiece coordinate systems 1 to 6 of G54 and G59. The format for setting the amount of shift is as
follows.
G10L2P
coordinate
[X
x
][Z
z
]
The number of the workpiece coordinate system (1 to 6) is specified by coordinate. Specifying “0” causes the amount of shift (EXOFS)
to be set for all workpiece coordinate systems.
The amounts of shift for the coordinate system are specified by x, y, and z. When “0” has been specified for coordinate, the value is set
with the machine coordinate origin taken as 0. When coordinate specifies the number of a workpiece coordinate system (1 to 6), the
value is set with a point shifted from the machine coordinate origin by a distance equal to EXOFS taken as 0.
Refer to "Part1_Coordinate Systems" for detailed information about coordinate systems.
Parameter
Function
Acceptable range
Effective range
coordinate
Work coordinate
Range 2
0—6
x
Coordinate or movement distance (X axis)
Range 1
Maximum cutting range
y
Coordinate or movement distance (Y axis)
Range 1
Maximum cutting range
z
Coordinate or movement distance (Z axis)
Range 1
Maximum cutting range
number
Offset number
Range 2
1—10
-10—300 [mm]
-10—10 [mm]
or -0.39—0.39 inch
or -0.39—0.39 inch
offset
Amount of offset
Содержание CAMM-3 PNC-3200
Страница 2: ......
Страница 62: ...60 MEMO ...
Страница 63: ......
Страница 64: ...R3 001018 NC code PNC 3200 ...