Roland Atelier AT-90SL, Руководство пользователя

Страница: 214 / 266

213
Troubleshooting
If the AT-90SL does not function in the way you except, first check the following chart. If this does not
resolve the problem, consult your dealer or a nearby Roland Service Station.
Problem Check Solution Page
When you press the [Power
On] switch, the power doesn’t
come on. Power cord is not connected
correctly. Connect the power cord correctly.
p. 19
No sound is heard.
The [Master Volume] slider is set too
low. Turn the [Master Volume] knob
toward “Max.”
p. 19
Headphones are connected.
When you connect the headphones,
the sound is heard only through the
headphones. If you want sound to be output from
the speakers, disconnect the
headphones.
p. 20
The plug is still plugged into the
headphone jack. Disconnect the plug from the
headphone jack.
p. 20
The volume is set too low on the
Level [
▲
] [
▼
] buttons.
Press the Level [
▲
][
▼
] buttons to
raise the volume.
p. 52
The volume is set too low on the
Expression Pedal. Advance the expression pedal.
p. 120
You do not have a Voice selected.
Voices that have their button
indicator lit can be played. Press a voice button to select a voice.
p. 39
No sound is heard.
(by the Lower keyboard)
Drums/SFX are selected for the
Lower keyboard, but you are
playing a key to which no drum
sound is assigned. Turn the Drums/SFX off or play
keys to which drums sounds are
assigned.
p. 56
No sound is heard.
(by the Upper keyboard)
“Percussion Set 3” has been selected
for the Upper keyboard.
When “Percussion Set 3” is selected,
some keys may have no sound
assigned to them. For the upper keyboard, select a
voice other than “Percussion Set 3.”
p. 41
No sound is heard.
(by the pedalboard)
Pedal cord is not connected correct-
ly. Use the pedal cable to connect the
pedal correctly.
p. 18
No sound is heard (when a
MIDI instrument is
connected).
The power of the connected external
devices is not turned on. Use the correct procedure to turn on
the power of the connected external
devices. p. 205
–
p. 210
The Computer switch on the bottom
of the unit is not set to “MIDI.” Change the setting of the computer
switch.
p. 208
Damper Pedal does not
operate.
The damper pedal affects only the
Lower keyboard and Upper
keyboard. The damper pedal does
not affect the Bass pedalboard. You can change the settings so that
the damper pedal affects the Upper
keyboard.
p. 188
The damper pedal does not affect the
Solo voice. This is not a malfunction.
- - -
Expression Pedal does not
operate.
The function of the Expression Pedal
during recording or the function
during playback has been set to
“COMPOSER.” Set the expression pedal function
during recording to “PEDAL,” and
during playback to “PEDAL” or
“PEDAL+COMPOSER.”
p. 187
Can’t use the function
assigned to the foot switch.
If “Regist Shift” (change
Registrations) is “RIGHT,” “LEFT,”
or “RIGHT + Load Next,” the foot
switch will be dedicated to switching
the Registration. Turn “Regist Shift” off.
p. 119
AT-90SL_e.book 213 ページ ２００４年９月８日 水曜日 午後５時４４分