Roland Atelier AT-90SL, Руководство пользователя

Страница: 208 / 266

207
Chapter 11 Connecting with External Device
4.
Turn on the computer.
5.
Turn on the AT-90SL.
6.
Make the settings for baud rate (transmission
speed) for the computer and the software.
For more information on this procedure, please refer to the
owner’s manual for your computer.
7.
You should also make the settings for the MIDI
send channel as needed (p. 197).
Connection Examples:
Connection with an Apple Macintosh computer
Use a computer cable (sold separately) to connect the
Computer connector on the AT-90SL to the modem port (or
printer port) on the Apple Macintosh. Set the Computer
switch to “Mac.”
When using the Macintosh “Patch Bay” utility, specify 1
MHz as the Interface Type (MIDI Interface Clock).
Connection with an IBM PC
Use a computer cable (sold separately) to connect the
Computer connector on the AT-90SL to the COM1 or COM2
serial port on the IBM PC. Set the Computer switch to “PC-
2.”
■
Connect to the MIDI Connectors
You can connect between your computer and the MIDI
connector of the AT-90SL using a EDIROL UM-1 or similar
USB MIDI interface cable (sold separately).
If the AT-90SL is connected to a computer in which
sequencer software such as Roland’s “Visual MT” is
installed, a song you’ve recorded on the AT-90SL can be
saved on your computer.
* In order to make connections to your computer, you must
install “MIDI driver” software on your computer. For details,
refer to the owner’s manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB connector
of your computer to the MIDI connectors of the AT-90SL.
Set the Computer switch on the AT-90SL’s bottom panel to
“MIDI,” then turn on the power to the AT-90SL.
Apple Macintosh
Macintosh IIci
Modem Port
Computer cable (sold separately)
Computer
PC-1
Mac
PC-2 MIDI
RS-232C
IBM PC/AT
Computer cable (sold separately)
Computer
PC-1
Mac
PC-2 MIDI
AT-90SL_e.book 207 ページ ２００４年９月８日 水曜日 午後５時４４分