4.
Key
[STAY]
is for quick stay arming and code stay arming. Any zone or zones can be set as
interior zone(s) or external zone(s). When arming by
[STAY]
, the external zone(s) will be
armed while leaves the interior zone(s) disarmed.
5.
Under the disarmed status, depress [*] to entry user’s function mode for setting code, clock,
on/off the buzzer and so on. For detail, go to CHAPTER 1- SUMMARY of USER’S
COMMANDS
1. Power LED
On--the system AC power supply is in normal and the stand-by battery is in good condition.
Off—no AC power supply and stand-by battery is in power lack.
Fast flicker—system in trouble.
Slow flicker—system is in users function.
2. LCD Display
The LCD Display on RP248KCL indicates the system status, including zones triggered,
armed/disarmed system, system trouble, time and other programmed information.
Normally the LCD Display indicates partition No., clock, date and weekday as following:
PARTITION 1
10.18 JAN 10 THU
3. ARM LED
On-- system is armed.
Off-- system is disarmed or under the programming status.
Flicker-- The system is under the delay period status.
4. READY LED
The Ready LED indicates whether the system is under ready or not, and also whether system can
be armed or not.
On-- The system is ready to be armed now.
Off-- The system is not ready to be armed now.
Flicker-- The system is ready for arming, and at the same time some especial zone(s) with entry
/exit delay is triggered.
RP248CN User’s and Installer’s Manual
Page 6
