3.6 Set date and time
Set date: [*]+[6]+[1]+[MASTER CODE]+[MM][DD][YY]
Month, Date and Year should be two digits.
Set time: [*]+[6]+[2]+[MASTER CODE]+[HH][MM]
Use a 24-Hour format. Hour and Minute should be two digits.
For example, if you want to entry 16:28, August 18, 2006, operate as:
[*]+[6]+[1]+[MASTER CODE]+[08][18][06]
[*]+[6]+[2]+[MASTER CODE]+[16] [28]
3.7 Set follow-me numbers
(Refer to the section 6.5.6 of chapter 6 for detail operation)
When alarm, RP248CN control panel can report the alarm events (burglar alarm, fire alarm, rob
alarm, emergency alarm) to one or several follow-me number(s) which has been set, and
distinguish different alarm events with different sound.
RP248CN has menu function for convenient operation. In normal status, depress [*][2][7][master
code][#] can entry into setting follow-me number and modify status. Up to 8 of follow-me numbers
can be set in the system. Depress [←][→] to move cursor left and right.
When setting follow-me number(s), should select the partition number first and then input
telephone number(s), and depress [#] to confirm.
3.8 Arm and arm sound
Quick arm
Any partition of RP248CN can be programmed or distinguished as stay zone or exterior zone.
Key
[ARM]
for quick arm all zones/partitions of the system. Please leave away from all the
partitions during the delay time.
Key
[STAY]
for quick stay arm all of the exterior partitions/zones, and stay zones would not be
triggered. Please leave away from all the stay zones immediately.
RP248CN User’s and Installer’s Manual
Page 14
