Program as the following:
1.
The Key [←] and [→] are used move the cursor to the left or to the right.
2.
Key in the character as the above form, such as depress [1] twice to entry the “A” and depress
[2] four times to entry the “P”.
3.
After entry one character, move the cursor to entry other one by Key [←][→].
4. After program, depress [#] to confirm, or depress [*] to cancel.
3.4 Digit Keys and Functions Keys
The Keys can support the following functions:
1.
Entry digit(s) for arming, disarming, panic alarm, programming system etc.
2.
Entry user’s function mode.
3.
Key [ARM] is for quick arming and code Arming.
4.
Key [STAY] is for quick stay arming and code stay arming. Each zone can be set as interior
zone or external zone. When use
[STAY]
for arming, the external zone is armed while leaves
the interior zone disarmed.
5.
Under the disarmed status, depress [*] to entry user’s function mode.
Reference to
CHAPTER
1- SUMMARY of USER’S COMMANDS
3.5 Modifying/ Setting and Deleting Code
The Master Code of RP248CN could be set as four or six digit code. The default master code is 1-
2-3-4. Unless your alarm company has already changed it to suit your preference, it’s best to
modify this code to one which is unique and personalized. RP248CN can set a great deal of
codes, one is master code and others are users’ code. The system code can be set under the
disarm status.
Functions of the Master Code:
Change the master code
Distribute, delete and change the system user’s code.
Access to all zones.
RP248CN User’s and Installer’s Manual
Page 10
